Drive Multiple Speeds With Different Reference Using Plc Vfd

Author Dalbo 29 Apr 2026

In this application we need to operate motor vfd drive in multiple speeds using different speed reference The diagram in figure 1 shows an operator station. This function is possible using plc

MULTI DRIVE DC MOTOR SPEED CONTROL

Drive Multiple Speeds With Different Reference Using Plc Vfd

Plc motor control guide for controlling three ac motors at different speeds A common plc application is the speed control of ac motors with variable speed (vs) drives Covers dol vs vfd approaches, i/o planning, and ladder logic development.

I have a pf 525 in my shop to experiment with, but not a pf 753

I'm stuck on how to assign a run command without an additional signal as a static reference, then the additional two speed. First off i think you have to use a forward/reverse input to start the inverter if you haven't wired them already For the speed you can either use one wire for low/high speed, or use one wire for each,. Diac providing winter training in plc scada, robotics, embedded systems and registration started few seats are left

This is a plc program to control motor speed using a vfd drive If you want the user to have two pots to choose from, you can use the drive pot for one reference and an analog input for the other with the analog input wired to an external pot. To set up the applications listed, follow the. Hi, i am hoping to get some advice on using a plc to achieve multispeed control on an at1 vfd

PLC Tutorials - Inst Tools

I have a plc program written to set certain digital outputs to high or low to control speed.

The proposed solution is using a plc and two variable speed drivers with different transmission ratio. We would like to show you a description here but the site won’t allow us. You can use the et value and a high fixed pt value to create time logic The above shows an example of using the et value to drive logic through.